HOME  |   PRODUCTS  |  SERVICE  |  SHOP  |  CONTACT  |  IMPRINT

» Start page » Products » Measures » Pressure gauge with Bourdon spring

« back 4.1 Pressure gauge with Bourdon spring Our pressure gauges are suitable for most liquid and gaseous media. The temperature of the media can be as much as 200°C depending on the pressure gauge design. The precise operating conditions should be indicated in the order. In the case of continuous load and great fluctuations in pressure, glycerine-filled pressure gauges should be used. The operating pressure should not exceed 70% of the full-scale value. Attention: The full-scale value must never be exceeded. A pressure gauge with front panel mounting and safety design should always be selected for high pressures. Safety design means: viewing window made of safety glass, breakproof partition (solid front) and rear panel that can be purged with compressed air. On request further options are also available, e.g. other connection threads or scale in psi or dual scale (bar and psi) Durchmesser 63 mm Messbereich Anschluss Genauigkeitsklasse Füllung Einbau   bar Gewinde* unten hinten 0,6 1 1,6 ohne Glycerin Standard Fronttafel Bestell-Nr. 0 - 10 A X X   -   - X X   X   X X 411-00010-AG-L-GK-F-E 0 - 16 A X X   -   - X X   X   X X 411-00016-AG-L-GK-F-E 0 - 25 A X X   -   - X X   X   X X 411-00025-AG-L-GK-F-E 0 - 40 A X X   -   - X X   X   X X 411-00040-AG-L-GK-F-E 0 - 60 A X X   -   - X X   X   X X 411-00060-AG-L-GK-F-E 0 - 100 A X X   -   - X X   X   X X 411-00100-AG-L-GK-F-E 0 - 160 A X X   -   - X X   X   X X 411-00160-AG-L-GK-F-E 0 - 250 A X X   -   - X X   X   X X 411-00250-AG-L-GK-F-E 0 - 400 A X X   -   - X X   X   X X 411-00400-AG-L-GK-F-E 0 - 600 A X X   -   - X X   X   X X 411-00600-AG-L-GK-F-E 0 - 1.000 A X X   -   - X X   X   X X 411-01000-AG-L-GK-F-E       Durchmesser 100 mm Messbereich Anschluss Genauigkeitsklasse Füllung Einbau   bar Gewinde* unten hinten 0,6 1 1,6 ohne Glycerin Standard Fronttafel Bestell-Nr. 0 - 10 66 X X   - X   - X   X   X X 412-00010-AG-L-GK-F-E 0 - 16 66 X X   - X   - X   X   X X 412-00016-AG-L-GK-F-E 0 - 25 66 X X   - X   - X   X   X X 412-00025-AG-L-GK-F-E 0 - 40 66 X X   - X   - X   X   X X 412-00040-AG-L-GK-F-E 0 - 60 66 X X   - X   - X   X   X X 412-00060-AG-L-GK-F-E 0 - 100 66 X X   - X   - X   X   X X 412-00100-AG-L-GK-F-E 0 - 160 66 X X   - X   - X   X   X X 412-00160-AG-L-GK-F-E 0 - 250 66 X X   - X X X   X   X X 412-00250-AG-L-GK-F-E 0 - 400 66 X X   - X X X   X   X X 412-00400-AG-L-GK-F-E 0 - 600 66 X X   - X X X   X   X X 412-00600-AG-L-GK-F-E 0 - 1.000 66, 21, 23 X   -   - X X X   X   X X 412-01000-AG-L-GK-F-E 0 - 1.600 66, 21, 23 X   -   - X X X   X   X X 412-01600-AG-L-GK-F-E 0 - 2.000 66, 21, 23 X   -   - X X X   X   X X 412-02000-AG-L-GK-F-E 0 - 2.500 66, 21, 23 X   - X X X X   X   X X 412-02500-AG-L-GK-F-E 0 - 3.000 66, 21, 23 X   -   - X X X   X   X X 412-03000-AG-L-GK-F-E 0 - 4.000 66, 21, 23 X   - X X X X   X   X X 412-04000-AG-L-GK-F-E 0 - 10.000 21, 23 X   -   - X X X   -   X X 412-10000-AG-L-GK-F-E       Durchmesser 160 mm Messbereich Anschluss Genauigkeitsklasse Füllung Einbau   bar Gewinde* unten hinten 0,6 1 1,6 ohne Glycerin Standard Fronttafel Bestell-Nr. 0 - 100 66 X X X   -   - X   X   X X 413-00100-AG-L-GK-F-E 0 - 160 66 X X X   -   - X   X   X X 413-00160-AG-L-GK-F-E 0 - 250 66 X X X   -   - X   X   X X 413-00250-AG-L-GK-F-E 0 - 400 66 X X X   -   - X   X   X X 413-00400-AG-L-GK-F-E 0 - 600 66 X X X   -   - X   X   X X 413-00600-AG-L-GK-F-E 0 - 1.000 66, 21, 23 X   - X   -   - X   X   X X 413-01000-AG-L-GK-F-E 0 - 1.600 66, 21, 23 X   - X   -   - X   X   X X 413-01600-AG-L-GK-F-E 0 - 2.000 66, 21, 23 X   - X   -   - X   X   X X 413-02000-AG-L-GK-F-E 0 - 2.500 66, 21, 23 X   - X X   - X   X   X X 413-02500-AG-L-GK-F-E 0 - 3.000 66, 21, 23 X   - X X   - X   X   X X 413-03000-AG-L-GK-F-E 0 - 4.000 66, 21, 23 X   - X X   - X   X   X X 413-04000-AG-L-GK-F-E 0 - 6.000 21, 23 X   - X X   - X   X   X X 413-06000-AG-L-GK-F-E 0 - 10.000 21, 23 X   -   - X   - X   X   X X 413-10000-AG-L-GK-F-E Bestellinformation:   *Anschlussgewinde ( bei Bestellung angeben anstatt "AG") Auf Anfrage lieferbar:   65: G1/4" Aussengewinde nach EN 837-1     66: G1/2" Aussengewinde nach EN 837-1 Durchmesser 40mm, 50mm, 80mm und 250mm   67: G3/4" Aussengewinde nach ISO 228/1 Skala in PSI bzw. doppelte Skala (bar und psi)   21: M 16x1,5 HD Anschlüsse G 3/8" oder 9/16" UNF   22: M 20x1,5 HD Schleppzeiger   23: 9/16"-18 UNF Zulassungen z.B. durch Germanischen Lloyd Lage des Anschlusses (bei Bestellung angeben anstatt "L") U: Gewinde unten H: Gewinde hinten Genauigkeitsklasse (bei Bestellung angeben anstatt "GK") 06: 0,6 10: 1,0 16: 1,6 Füllung (bei Bestellung angeben anstatt "F") 0: ohne Füllung G: Glycerinfüllung Einbau (bei Bestellung angeben anstatt "E") S: Standard F: Fronttafel

TOP